What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 01:01

For this case there are devices called Metal oxide varistors (MOV).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Why do many Hong Kong Chinese look different from the Han Chinese in mainland China?
A fuse is a non-resetable over current circuit protector.
(Dc diagram shown, AC is similar).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where the MOV conducts again, and dissipated the energy.
[old diagram got deleted by accident]
One is “what exactly is in a ‘surge protector’ ? ”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, what happens?
Why are so many young teenage boys misogynistic? Where do they get these attitudes from?
This is 'the assistant's answer'
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
What symptoms did you notice before being diagnosed with cancer?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then describes the function of a fuse.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This device then solves the entire problem.
At one ohm, the resistor has a maximum of 1 watt power.
What is lightning?
What does it mean to you to live a life that reflects biblical values?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Why do narcissists keep calling on the phone after years of separation?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This one hit behind the barn.
nine
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
The third is lightning and “how it gets conducted into a home.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Can people who have never met you tell if you are a covert narcissist?
Because the load is inductive, the current lags the voltage.(by a bit).
what exactly is a ‘surge’ protector?
Here is a simplified AC power diagram.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There are two important concepts here.
It seems Mohan does not understand the difference between a comment and an Answer.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
An AC voltage/ current source, and an ac inductive load.
There are three different concepts here that are getting confused.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.
At least they know the answer if they wanted it.
Upvotes:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
but I think this circuit , shows a few more pieces.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But it can get overloaded, and no longer works.
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
First Sentence:
a photo is worth a thousand words.
but this device (an Inductor) … impedes the rapid changes in the current.
Edit 2024–10.
Barnstars:
These are simplified answers to the original question, and does not change anything I wrote above.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
the problem then depends on "how fast does the fuse operate?".
One
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
These devices are installed between the “hot” and “neutral” and protective ground.
A circuit breaker is similar, but is resettable.
The other is “what does a “fuse” do?”
He then asserts :
eight
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What does a fuse do?
In schematic diagrams this is the symbol for a fuse:
I post the exact comment here.
2024–10–10[John johnson John Johnson ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes Rainy Season and Lightning.